Adding New Virtual Server Service Configuration
Step 1. Select Virtual Server in the menu bar on the left hand side, and then select Virtual Server 1/2/3/4
sub-selections.
Step 2. In Virtual Server 1/2/3/4 Window, click "New Entry" button.
Step 3. Enter the parameters in the Virtual Server Configuration column.
Virtual Server Real IP: displays the WAN IP address assigned to the Virtual Server
Service Name (Port): select the service from the pull down list that will be provided by the
Real Server (Load Balance Server).
External Service Port: Input the port number that the virtual server will use. Changing the
Service will change the port number to match the service.
Load Balance Server: The internal server IP address mapped by the virtual server. Four
computer IP addresses can be set at most, and the load can be maintained in a balance by
round robin algorithm.
Click OK to execute adding new virtual server service, or click Cancel to discard adding.
Multi-Homing Security Gateway User's Manual
- 105 -