Sleep Message; Function Show - AMX Color Active-Matrix LCD Instruction Manual

Figure 133
SLEEP MESSAGE button
Figure 134
FUNCTION SHOW button
Figure 135
Function show button and
slider example
Color Active-Matrix LCD Mini-Touch Panels

Sleep message

Press SLEEP MESSAGE (Figure 133) to open a keyboard and enter a message to ap-
pear when the touch panel goes into sleep mode. Refer to Display Timer to set the
touch panel's screen-saver mode.

Function show

Press FUNCTION SHOW (Figure 134) to display channel code numbers and variable
text code numbers on touch panel buttons, joysticks, sliders, and bargraphs.
As shown in Figure 135, the upper-left corner of a button shows a base device num-
ber followed by a channel code number. The bottom-right corner of a button shows
the variable text number followed by the variable text channel.
Base device
number
3, 132
Button LIGHT
PANEL
Variable text
device number
Text channel
Channel code
number
2, 1
Slider
2, 255
1,255
Level channel
Level device
number
Touch Panel Program Reference 79