Table of Contents
Advertisement
Figure 228
File drop-down menu
Figure 229
Sample Save as dialog box
Caution
This naming must follow the
8.3 file naming convention for
MS-DOS. By not following this
format, TPDesign.exe will re-
name the file name to match.
Note
This file convention is used
because the TPDesign (16-
bit) doesn't recognize long
naming conventions.
Color Active-Matrix LCD Mini-Touch Panels
10.
Enter a file name for the uploaded touch panel file to be saved as into the File
Name field. The file name must follows an MS-DOS 8.3 file naming convention.
The File Name lists those files with the same extension assigned to the type of
panel that was selected.
11.
Select a drive letter from the Drives field in Figure 229. This drop-down list lets
you select the destination drive where you want to save the uploaded file.
12.
Select the directory location where to save the file. The Directories field provides
a directory tree that you can use to select the location where the file will be
stored. The Current Path field shows the location through a directory path.
Upgrading from G2 to G3 Firmware
157
Advertisement
Table of Contents
