Table of Contents
Advertisement
Figure 224
Sample New Panel dialog box
Figure 225
Panels dialog box
Note
Make sure the AXlink LED is
blinking twice per second.
Color Active-Matrix LCD Mini-Touch Panels
2.
Select the type of panel from the New Panel dialog box.
3.
Click OK.
4.
The Panels dialog box (Figure 225) then appears. This screen lists the Device ad-
dresses for those touch panels connected to the Central Controller that match the
parameters of the panel type selected in Figure 224.
5.
Enter the device number that corresponds to the target touch panel from the On-
line panels that lists all touch panel device numbers that are connected to the
Central Controller bus.
Upgrading from G2 to G3 Firmware
155
Advertisement
Table of Contents
