Table of Contents
Advertisement
Figure 10
UniMount (AXU) and) and BB-
MTP cutout dimensions
Note
The BB-MTP can also be
mounted to wood or metal
studs using the pre-drilled
stud mounting holes.
Note
The touch panel must always
be installed with the release
slot located at the bottom.
10
Installing Mini-Touch Panels
1.
For UniMount–style (AXU) touch panels, cut out the surface using the dimen-
sions shown in Figure 10. For Decor-style (AXD) touch panels, cut out the surface
using the dimensions shown in Figure 11.
2.
Carefully insert a flat-blade screwdriver into the release slot on the touch panel's
bezel and remove the engraved overlay.
3.
Lay the touch panel facedown onto a soft cloth and remove the screws from the
low-profile Back Box. Remove the Back Box and discard.
4.
Place the BB-MTP into the cutout and mark the threaded insert positions as
shown for the UniMount (Figure 10) or the Decor-style panel (Figure 11).
Color Active-Matrix LCD Mini-Touch Panels
Advertisement
Table of Contents
