Table of Contents
Advertisement
148
Replacing the Lithium Batteries
8.
Return the mini-touch panel to the Back Box or equipment rack and connect the
AXlink connector back into the rear side of the panel for approximately 1 minute.
Then, remove the connector from the panel again.
9.
Repeat steps 5 through 8 for the second battery. Then, go to step 10.
10.
Return the mini-touch panel to the Back Box or equipment rack and connect the
AXlink header.
11.
Insert the four mounting screws and tighten.
12.
Place the UniMount backing or Decor-style faceplate onto the bezel and install
the engraved overlay.
Color Active-Matrix LCD Mini-Touch Panels
Advertisement
Table of Contents
