AMX Color Active-Matrix LCD Instruction Manual page 37

Note
If you press ENTER after
typing in an incorrect pass-
word, you are immediately
returned to the current page.
Figure 37
Protected Setup page with the
active EDITOR button
Color Active-Matrix LCD Mini-Touch Panels
3.
Enter 1988 in the keypad and press ENTER to open Protected Setup page
(Figure 37). For information on changing the password, refer to the Touch Panel
Program Reference section. If you enter a wrong number, press CLEAR and re-
enter the number.
4.
Press EDITOR to enable the Edit mode. The EDITOR button is highlighted when
enabled (Figure 37).
5.
Press EXIT to close the Protected Setup page and return to the Setup page in Edit
mode.
6.
Press EXIT again to return to the Main page. The EDIT button appears at the top
of the Main page indicating that Edit mode is active (Figure 38).
Designing Touch Panel Pages 29