AMX Color Active-Matrix LCD Instruction Manual page 75

Note
The GROUP ID number can
be set from the Wireless Set-
tings page in the Protected
Setup page. Refer to the
Wireless settings subsection
for detailed information.
Note
Both Network Eff. XXX% and
Device Eff. XXX% are the
best indicators of communi-
cation.
Color Active-Matrix LCD Mini-Touch Panels
locked on (communicating) to the AXR-WAVES connected to the Central
Controller.
Battery Voltage XX.X
able battery in the WAV-PKM.
RSSI XXX%
Shows the strength of the AXR-WAVES signal received by
the touch panel. The signal strength fluctuates between 0% and 100% as
shown by a horizontal gauge moving from left to right.
GROUP ID
Shows the GROUP ID number on the touch panel used to
communicate with the wireless AXR-WAVES with the same group ID num-
ber. The group ID range is 0 – 15. The group ID setting overrides the DIP
switch setting on the WAV-PKM.
Module Version vX.XX
WAV-PKM.
Fully Charged/Not Charging/Charging
the battery in the WAV-PKM is fully charged. Not Charging appears when
the lead-acid battery is not charging. Charging appears when the lead-acid
battery is charging. The shaded area is a horizontal gauge moving from left
to right as the battery voltage level increases.
Network Eff. XXX%
Shows the communication efficiency of bidirectional
RF transmissions between the touch panel and AXR-WAVES. The efficiency
percentage (0–100%) is determined by the number of retries required to
complete a panel operation.
Device Range
Shows the device range that your server can recognize.
Devices outside that range will not be recognized.
Server Devices XXX
Shows the group address for the AXR-WAVES
communicating with the touch panel.
Server Version
Shows the firmware version installed in the AXR-
WAVES.
Supply Voltage vX.XX
supply (optional) connected to the WAV-PKM.
Device Eff. XXX%
Shows the strength of the AXR-WAVES signal re-
ceived by the touch panel. The shaded area in the horizontal gauge moves
from left to right as the RF signal intensity increases. The shaded area fluctu-
ates between 0% and 100%.
Shows the voltage level of the lead-acid recharge-
Shows the firmware version installed in the
Fully Charged appears when
Shows the voltage level of the external power
Touch Panel Program Reference 67