Beep; Display Timer - AMX Color Active-Matrix LCD Instruction Manual

Figure 93
Setup page
Note
The WIRELESS STATUS
button appears when a WAV-
PK or SMT-PK is attached to
the touch panel.
Figure 94
BEEP button
Note
You can set the beep value
setting using the 'ABEEP' and
'ADBEEP' Send_ Commands
described in the AXCESS
Programming section. The
'QBEEP' command is used for
overriding.
62 Touch Panel Program Reference

Beep

The BEEP button (Figure 94) sets the audible beep duration when you touch the
screen.
Set the BEEP button to 0 to disable the beep sound. Press the UP and DN buttons to
set beep time in .10-second increments. The minimum beep time setting is 0 and the
maximum is 5 (0.5-second duration).

Display timer

The DISPLAY TIMER button (Figure 95) sets the length of time the touch panel can
be idle before activating screen-saver mode.
Optional
WIRELESS
STATUS button for
WAV-PKM and
SMT-PKM wireless
control systems.
Color Active-Matrix LCD Mini-Touch Panels