AMX Color Active-Matrix LCD Instruction Manual page 19

Figure 11
Decor-style (AXD) and BB-
MTP cutout dimensions
Color Active-Matrix LCD Mini-Touch Panels
5.
Remove the BB-MTP and drill eight holes as shown for the UniMount
(Figure 10) or the Decor-style panel (Figure 11). Then, place #6-32 threaded in-
serts into the four holes marked 'B' in the cutout dimensions illustration.
6.
Disconnect the AXlink connector from the Central Controller and optional video
wiring from the video source. Remove one or more knockouts to accommodate
the wiring as required.
7.
Remove one or more knockouts to accommodate the wiring as required.
Installing Mini-Touch Panels 11