Calibrating The Touch Panel - AMX Color Active-Matrix LCD Instruction Manual

Figure 234
G3 firmware memory re-
quirements
Note
There is no Extended Memory
for G3 version touch panels
because all of these panels
are shipped with Standard
Memory.
Figure 235
Memory reset button
Figure 236
Setup page
Note
Use this screen to confirm the
firmware version.
162 Upgrading from G2 to G3 Firmware
G3 Firmware memory requirements
Touch panels Memory requirements
AXD-MCA (/PB) 512 KB
AXT-MCA (/PB) 512 KB
AXM MCA (/PB) 512 KB
AXU MCA (/PB) 512 KB
AXD-MCV (/PB) 512 KB
AXT MCV (/PB) 512 KB
AXM-MCV (/PB) 512 KB
AXU-MCV (/PB) 512 KB

Calibrating the Touch Panel

Once power has been restored to the panel, a memory message (Figure 235) appears.
1.
Press the memory reset button, then the SETUP button in the Main page to open
the Setup page shown in Figure 236. Use this screen to confirm the firmware ver-
sion.
Firmware
version
Color Active-Matrix LCD Mini-Touch Panels