AMX Color Active-Matrix LCD Instruction Manual page 105

Note
HUE and SATURATION do
not appear on the VIDEO
SETUP page if the incoming
video signal is PAL format.
Note
Video is displayed through a
button, while graphics are
displayed as a background
color option on the page.
Note
The video is displayed behind
the joystick display.
Note
This feature is not available in
the mini-touch panel.
Figure 167
RGB Setup page
Color Active-Matrix LCD Mini-Touch Panels
SATURATION Press UP or DN to increase or decrease the saturation level of
the input video. The saturation range is from 0–255. You can also press SET TO
DEFAULT to automatically set the color saturation to 155 (factory setting).
HUE Press UP or DN to increase or decrease the hue level of the input video.
The hue range is from 0–255. You can also press SET TO DEFAULT to auto-
matically set the hue level to 128 (factory setting).
VIDEO WINDOW
Sets the button to a video window that displays the in-
coming video signal. Refer to Protected Setup Page and Page color subsections
for more information about the relation between video window and graphic
background page.
VIDEO JOYSTICK
Sets the button to a video joystick that displays the in-
coming video signal, and a control stick. When you move the control stick,
the mini-touch panel sends feedback (data) to the Central Controller and to
the external device to perform a pre-programmed operation.
RGB SETUP
Sets the button to open the RGB SETUP page (Figure 167) so
you can adjust the incoming video signal on the mini-touch panel.
PROTECTED
Sets the button to open the Protected Setup page. Refer to
Protected Setup Page in this section for more information.
Touch Panel Program Reference 97