Using Tpdesign3 To Download Bitmaps, Icons And Fonts - AMX Color Active-Matrix LCD Instruction Manual

Figure 64
BITMAPS menu example
Color Active-Matrix LCD Mini-Touch Panels
5.
Press BTMP OFF to set the bitmap for the OFF state of the selected button. This
opens the BITMAPS menu. The BITMAPS menu contains a list of all the bitmaps
currently available to the project. An example BITMAPS menu is shown in
Figure 64.
6.
Select a bitmap from the bitmap menu. This sets the bitmap for the selected but-
ton's Off state.
7.
On the Text/image page, press MAKE ON SAME AS OFF to set the bitmap for
both On and Off states of the button.
8.
Press EXIT SAVE CHANGE to set the button text and close the Text/image page
and return to the NEW page.
9.
Press EXIT in the Edit bar to exit Edit Text/Image mode and close the Edit bar.

Using TPDesign3 to Download Bitmaps, Icons and Fonts

The TPDesign3 touch panel design software program allows you to import bitmaps
icons and fonts into your touch panel from an existing touch panel program. Use the
Download to Panel feature of TPDesign3 to download a project file. For detailed in-
structions on using TPDesign3, refer to the TPDesign3 Touch Panel Program instruction
manual.
The following steps describe how to download bitmaps, icons and/or fonts from an
existing TPDesign3 project file.
1.
Launch the TPDesign3 software program and open a project file that contains the
desired bitmaps, icons and fonts.
Designing Touch Panel Pages 45