System Page - AMX Color Active-Matrix LCD Instruction Manual

Figure 118
POWER UP MESSAGE but-
ton
Figure 119
SYSTEM PAGE button
Figure 120

System page

Warning
The System page should only
be used to purge unwanted
buttons, bitmaps, icons, fonts,
and stored touch panel set-
tings. Before using this page,
make sure you have a backup
copy of the touch panel pro-
gram stored in the TPDesign3
software program. If you
press YES on any of the
DELETE buttons, the stored
data is permanently erased
from panel memory.
Figure 121
Delete All Buttons decision
button
Color Active-Matrix LCD Mini-Touch Panels
sage is received. Refer to the AXCESS Programming section for detailed programming
information.
System page
Press the SYSTEM PAGE button (Figure 119) to open the System page (Figure 120).
DELETE ALL BUTTONS
Press YES to clear all touch panel buttons or NO to cancel the operation.
MEM FREE
Shows the memory available to store buttons in 1,024-byte in-
crements.
Opens the decision button shown in Figure 121.
Touch Panel Program Reference 75