Setting The Button Colors For Channel-Off Conditions; Adding Text, Icons, And Bitmaps To A Button; Using Tpdesign3 To Download Bitmaps, Icons, And Fonts - AMX 10.4 TOUCH PANELS (G3 FIRMWARE) Instruction Manual

Setting the button colors for channel-off conditions

1. Press any button to open the Button Properties page.
2. Press
Select a color to set as the border.
3. Press the
the fill.
4. Press the
5. Press
return to the current page.

Adding text, icons, and bitmaps to a button

1. Press
2. Press
3. Press any button to open the Text/Image page.
4. Go through each option and set as desired:
!
!
!
!
You cannot create or edit buttons with Unicode fonts on the panel. Any use of the
TEXT/IMAGE button to alter or create Unicode font supported buttons must be done
in the TPDesign3 Touch Panel Design Program.
5. Press

Using TPDesign3 to Download Bitmaps, Icons, and Fonts

TPDesign3 allows you to download bitmaps, icons, and fonts into your touch panel from an
existing touch panel program. Touch Panel programs are created in the TPDesign3 software
program. Refer to the TPDesign3 Touch Panel Program instruction manual for more information.
Use the Download to Panel button to download a project file.
To download bitmaps, icons and/or fonts from an existing TPDesign3 project file:
1. Launch the TPDesign3 software program and open a project file that contains the desired
bitmaps, icons, and fonts.
2. Select File from the menu bar to open the File menu.
3. In the File menu, click on Download to Panel, this opens the Download to Panel dialog box.
4. Click on the Comm Settings tab to set the communications port, baud rate, and other
communication settings.
5. Then, click the Actions tab to set the communication mode and select which elements of the
project file you want to download to the touch panel.
10.4" Touch Panels
under
BORDER CHANNEL OFF
button in the Button Properties page to open the palette. Select a color to set as
FILL
button to open the palette. Select a color to use for the text.
TEXT
in the Button Properties page to save the new button properties and
EXIT SAVE CHANGE
on the Edit bar to open the
BUTTON
to add text to the button. The
TEXT/IMAGE
and sets the text for the button's Off and On state.
TEXT OFF TEXT ON
and sets the icon for the button's Off and On state.
ICON OFF ICON ON
and
BITMAP OFF BITMAP ON
sets the On and Off properties the same.
MAKE ON SAME AS OFF
to close the Text/Image page and return to the Main page.
EXIT SAVE CHANGE
in the Button Properties page. The color palette appears.
menu.
BUTTON
TEXT/IMAGE
sets the bitmap for the button's Off and On state.
Designing Touch Panel Pages
operation bar appears.
21