Operation At The Time Of X/Y Motor Position Slip; When The Error Is Displayed During Sewing - JUKI AMS-210ENHL2210/TF10S Instruction Manual

4-20. Operation at the time of X/Y motor position slip

When X/Y motor detects the position slip, the error screen is displayed.
Timing of error display can be changed with the selection of memory switch. For the details, refer to the
Engineer's Manual.

(1) When the error is displayed during sewing

① Release the error.
Press RESET button
thread trimming pop-up is displayed.
② Perform thread trimming.
Check the seam. If you fi nd no problem, press the START
switch to re-start sewing.
If not, press THREAD TRIM button
thread trimming.
When performing thread trimming, the feed forward/back pop-
up is displayed.
③ Adjust the presser to the re-sewing position.
In addition, when RETURN TO ORIGIN button
pressed, the pop-up is closed, the sewing screen is displayed,
and the presser returns to the sewing start position.
④ Re-start sewing.
When the START switch is pressed, the sewing machine re-
starts sewing.
– 93 –
to release the error and the
and perform
is