Operation At The Time Of X/Y Motor Position Slip; When The Error Is Displayed During Sewing - JUKI AMS-221ENTS Instruction Manuals

2-33. Operation at the time of X/Y motor position slip

When X/Y motor detects the position slip, the error screen is displayed.
Timing of error display can be changed with the selection of memory switch. For the details, refer to the
Engineer's Manual.

(1) When the error is displayed during sewing

C
E
① Release the error.
Press RESET button
thread trimming pop-up is displayed.
A
② Perform thread trimming.
When it seems to be no problem after checking the stitches,
depress the start pedal without change and re-start the sew-
ing.
If not, press THREAD TRIM button
B
thread trimming.
When performing thread trimming, the feed forward/back pop-
up is displayed.
③ Adjust the presser to the re-sewing position.
Every time FEED BACK button
er returns by one stitch. Every time FEED FORWARD button
D is pressed, the presser moves forward by one stitch.
Move the presser up to the re-sewing position.
In addition, when RETURN TO ORIGIN button
D
pressed, the pop-up is closed, the sewing screen is displayed,
and the presser returns to the sewing start position.
④ Re-start sewing.
When the pedal is depressed, sewing starts again.
– 93 –
A to release the error and the
B and perform
C is pressed, the press-
E is