Table of Contents
Advertisement
15. How to edit/check the data other than sewing data
The screen for editing/checking the various data is invoked by selecting the menu on the mode screen.
1) Set the mode to input mode.
Under the input mode where set ready LED
goes out, the mode screen can be called. If the
current mode is the sewing mode, press READY
key ❷
to change over the mode to the
input mode.
2) How to invoke the mode screen.
Press MODE key ❹
screen (operator level).
Then, keep MODE key ❹
for three seconds to display the mode screen
(service level).
On each level mode screen, the menu items listed
in the table below are displayed.
Display level
Operator level
Maintenance personnel
level
to display the mode
held pressed
Menu on the mode screen
Memory switch 1
Version display
Communication
Regist. of parmtr key
Sewing parameter edit selection
USB format
Check program
Pedal VR adjustment
Adjustment of contrast
Memory switch 2
Key lock
Production parameter
❷
– 45 –
❻
❼
❹
Advertisement
Table of Contents
