Optional Devices - JUKI DDL-8000AS Instruction Manual

6-5. Optional devices

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
JUKI standing-machine pedal unit (PK-70 / -71) can be used with the DDL-8000A Series sewing machine by
using the optional standing-work pedal junction unit (JUKI Part No.: 40242689).
It is not allowed to use the standard pedal and the standing-machine pedal simultaneously.
❸
❸
❹
❺
❹
❻
❶
❷
❶
❸
❸
❹
– 70 –
Structure of the standing-machine pedal junction
unit
❶ Main body of the standing-machine pedal junction
unit
❷ Table-fixing wood screw (2 pcs.)
Connection method
1) Loosen and remove four setscrews ❸ . Detach
the rid of standing-machine pedal junction unit ❶ .
2) Connect connector ❺ of the standing-machine
pedal unit to connector ❹ on the PCB.
Take care of the orientation of the con-
nector key.
❻ of the standing-machine pedal
3) Push the cord
unit into the slot in the standing-machine pedal
❶ .
junction unit
The slot is slightly narrow to allow the
cord to be clamped.