Document Conventions; Text Formatting; Command Syntax Conventions - HP StoreFabric SN6500B Administrator's Manual

•
•
For further information, refer to the release notes.

Document conventions

This section describes text formatting conventions and important notices formats.

Text formatting

The narrative-text formatting conventions that are used in this document are as follows:
For readability, command names in the narrative portions of this guide are presented in mixed
lettercase: for example, switchShow. In actual examples, command lettercase is often all
lowercase.

Command syntax conventions

Command syntax in this manual follows these conventions:
command
option, option
--
argument, arg
-
[ ]
Access Gateway Administrator's Guide
53-1002743-01
Chapter 2
-
Added port mapping details for the Brocade 5430 switch to
mapping" on page 17. Table 5,
-
Added "D_Port support"
Chapter 3
-
Added notes to "Failover policy"
failover and failback policy are disabled, an F_Port mapped to an N_Port will go offline
when the N_Port goes offline and it will go online when the N_Port comes online.
-
Under"Considerations for the Brocade 6505 and 6510"
on demand (POD) licenses must be present to support Access Gateway.
bold text Identifies command names
Identifies the names of user-manipulated GUI elements
Identifies keywords and operands
Identifies text to enter at the GUI or CLI
italic text Provides emphasis
Identifies variables
Identifies paths and Internet addresses
Identifies document titles
text Identifies CLI output
code
Identifies syntax examples
Commands are printed in bold.
Command options are printed in bold.
Arguments.
Optional element.
on page 32.
on page 50 and "Failback policy"
"Access Gateway default port
on page 55 that If
on page 72, added that all ports
xv