Using Reboot; Reboot Command-Line Syntax; Reboot Command-Line Arguments; Reboot Return Codes - HP ProLiant DL320e User Manual

The Scripting Toolkit utilities include:
REBOOT
SETBOOTORDER (Limited functionality for HP ProLiant 100 series servers)
STATEMGR (Utility is not supported on 100 series servers)
RBSURESET
HPDISCOVERY
IFHW
HWQUERY
CONREP
HPRCU
HPACUSCRIPTING
HPLPCFG
LO100CFG (Utility only supports HP ProLiant 100 series servers)
HPQLAREP
HPONCFG (Not supported on HP ProLiant 100 series servers using the Oxx ROM family)

Using REBOOT

The REBOOT utility enables the user to reboot the server, controlling which device is the boot
device. In conjunction with other utilities, the REBOOT utility controls server reboots from a batch
file.

REBOOT command-line syntax

REBOOT [DRIVE:] [/?]

REBOOT command-line arguments

Command line argument
[DRIVE:]
/cold
/?

REBOOT return codes

There are no return codes for the REBOOT utility.

REBOOT command-line examples

Command-line argument
REBOOT A:
REBOOT PXE
Description
Valid arguments that can be passed to REBOOT are A:, C:, CD, RBSU, or PXE. By
specifying an argument, the drive indicated is set to boot on the next reboot, and the
system is restarted. If no argument is provided, then the system is set to boot using
the defined boot order.
This argument performs a one-time cold boot of the system.
This argument displays help information.
Description
This command reboots the system to the A: drive.
This command reboots the system by itself to the PXE NIC.
Using REBOOT 17