Making The Network Settings (Network Setup) - Marantz SR6006 Owner's Manual

Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey ®
Auto Setup.
1
ui
Use to select "Parameter Check" and then press
SPEAKER SETUP
Auto Setup Audyssey Auto Setup
Amp Assign Parameter Check
Speaker Config.
Bass Setting
Distance
Channel Level
Check auto setup measurement results
2
Use ui to select the item you want to check, then press
Measurement results for each speaker are displayed.
Speaker Config. Check
Check the speaker configuration.
Distance Check Check the distance.
Channel Level Check Check the channel level.
Crossover Freq. Check Check the crossover frequency.
EQ Check Check the equalizer.
• If "EQ Check" is selected, press ui to select equalizing curve ("Audyssey" or "Audyssey Flat") to
be checked.
Use ui to switch the display between the different speakers.
3
Press RETURN .
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey ® Auto Setup settings
If you set "Restore" to "Yes", you can return to Audyssey ® Auto Setup measurement result (value
calculated at the start by MultEQ ® XT) even when you have changed each setting manually.
Set up speakers (Audyssey ® Auto Setup)
ENTER
.
ENTER or p .
26
Making the network settings
(Network Setup)
This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and
still image (JPEG) files stored on a computer.
1
Connect the Ethernet cable (vpage 19
2
Turn on this unit (C page 5 "Getting
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in "Network
Connecting" (vpage 107).
"Connecting to a home network (LAN)").
Started").