Marantz SR6006 Owner's Manual page 76

Zone Management function
The status of devices connected to the same network can be
displayed. Additionally, network menu browsers and volume controls
can be performed via the network for the connected devices. This is
useful when playing back network services of a device located in a
separate room.
Only devices compatible with the Zone Management function can be
operated. With the Zone Management function, the network menu
screen and playback screen of the target device to be controlled are
displayed but playback with this unit is not possible. If you also want to
play the same music as the other device, use the Party Mode function.
1
Press ui to select "Network Setup" – "Other" –
"Zone Management" from the menu, and then press
ENTER or p .
OTHER
Character
PC Language
Friendly Name Edit
Party Mode Function
Zone Management
Update Notification
Check the status of other D&M products on
your network and browse the network menu
2
ui
Press to select the Friendly
Name of the device, and then
press ENTER or p .
ZONE MANAGEMENT
marantz:[SR6006]
marantz:[M-CR603]
Return
RETURN
Check status and select device for content browsing.
• Displays up to a maximum of 10 marantz products connected on
the same network.
BD
3
Press ui to select "Device Control", and then press
ENTER
.
When the device control mode is started, the network menu
of the connected device is displayed on this unit's television
screen.
Model SR6006
Power ON
Select Source NET/USB
Volume Level -20.0dB
Device Control
Enter
RETURN
Start device control
NOTE
• If the selected device is compatible with the Zone Management
function, "Device Control" mode starts.
• If the selected device is in Party Mode or being controlled with
Zone Management, "Device Control" is not displayed.
4
Press NET/USB to switch the remote control
operating mode to "NET/USB".
5
uio p ENTER
Press and to select the desired track.
[1/7]
REMOTE CONTROL
Favorites
Internet Radio
Media Server
Flickr
Last.fm
Napster
Exit Vol.up
AMP MENU CH+ CH-
• When in device control mode,
television screen of the controlling device, and
on the television screen of the device being controlled.
73
The zone management function can only be used on a combination
of marantz devices that are equipped with the zone management
function.
NOTE
• When the input source is switched to NET/USB operation mode
by pressing NET/USB, the volume of the selected device can be
controlled using
down). Note that the volume level is not displayed.
• For services that require an account, set the account settings on the
target device in advance. Also, some functions of the device may be
restricted in "Device Control" mode.
Return
n To end "Device Control" mode
1
Press AMP MENU
Control" mode.
"Exit Device
displayed on the TV screen.
2
Press o p
press ENTER
"Power off Remote component?" is
displayed on the TV screen.
3
o p
Press
Yes Turns off the target device and ends "Device Control"
mode.
No Ends "Device Control" mode without turning off the
power off the target device.
"Device Control" mode can also be ended from the controlled device
Vol.down
side.
AMP MENU
is displayed on the q Press
is displayed w When "Exit Device Control Mode?" is displayed on the TV
screen, select "Yes" and then press
Convenient functions
CHANNEL + CHANNEL –
(volume up) and (volume
in "Device
Control Mode?" is
to select "Yes", then
.
ENTER
to select "Yes" or "No", then press
on the controlled device.
ENTER
.
.