Marantz SR6006 Owner's Manual page 62

Connect
6.1-channel (Surround back speaker) connection
If using only one surround back speaker (with a 6.1-channel connection), connect to the "L" side of the
SURR. BACK/AMP ASSIGN terminal.
For speaker settings in this case, see "When 6.1ch (Surround back speaker) installed" (vpage 56).
To perform 6.1-channel playback using the surround back speaker, set "Amp Assign" to "NORMAL" in
steps 3 and 4 for "Set up "Amp Assign"" (vpage 64).
Also use the "Speaker Config." setting (vpage 101) to set "Surr.Back" to "1spkr".
NOTE
• For speaker cable connections, see C page 6 "Connecting the
speakers".
• For speaker impedance , see page 57.
FL FR
SW
C
SL
SR
SB
59