Video Output; Playback; Video Connection - Marantz SR6006 Owner's Manual

Video output

Video Connection

The video signals of this unit's ZONE2 video output terminal are
played by the ZONE2 TV.
MAIN ZONE
This unit
NOTE
• It is not possible to output video signals input to the HDMI or
component terminals to ZONE2.
• The menu screen is not output.
BD

Playback

1
Z2 Z3
Press or
control unit to ZONE2 or
ZONE3 operation mode.
2
ON Z
Press to turn on the ZONE2
or ZONE3 power.
ZONE2
• "ZONE2" or "ZONE3" appears on the
VIDEO
display.
IN
STANDBY X
• When
ZONE3 turns off.
• Power in ZONE2 can be turned on or off by
ZONE2 ON/OFF
pressing
on the main unit.
3
Press SOURCE
The audio signal of the selected source is output to ZONE2 or
ZONE3.
• Every time you press
source switches in the following order.
z
ZONE2/3 Source
ZONE2/3 M-XPort
ZONE2/3 HD Radio
ZONE2/3 PHONO
ZONE2/3 CD ZONE2/3 TV
z When "Source" is selected, the input source of ZONE2 or ZONE3
is the same input source as MAIN ZONE.
INPUT SELECTOR
• Turn
unit to select an input source.
to set the remote
is pressed, ZONE2 or
ZONE3 ON/OFF
or
d or SOURCE
f.
SOURCE d SOURCE f
or , the input
ZONE2/3 BD ZONE2/3 DVD ZONE2/3 VCR
ZONE2/3 SAT
ZONE2/3 GAME
ZONE2/3 AUX1
ZONE2/3 NET/USB ZONE2/3 AUX2
ZONE SELECT
after pressing on the main
80
Adjusting the volume
VOLUME + –
Use , to adjust the volume.
GAdjustable rangeH – – – –80dB – –40dB – 18dB
(When the "Volume Display" (vpage 112) setting is "Relative")
GAdjustable rangeH 0 – 41 – 99
(When the "Volume Display" (vpage 112) setting is "Absolute")
• At time of purchase, "Volume Limit" (vpage
"–10dB (71)".
VOLUME ZONE SELECT
Turn after pressing on the main unit to adjust
the sound volume.
Turning off the sound temporarily
MUTE
Press .
The sound is reduced to the level set at "Mute Level" (vpage 111)
in the menu.
• To cancel, either adjust the volume or press
• The setting is canceled when the zone's power is turned off.
You can adjust the tone and volume for ZONE2 and ZONE3 in "Zone
Setup" (vpage 111) in the menu.
111) is set to
MUTE
again.
vSee overleaf