Marantz SR6006 Owner's Manual page 92

Setting items
DIGITAL COAX (coaxial) 1, 2 / OPT (optical) 1, 2
Set this to change the digital None : Do not assign a digital input connector to the selected input source.
input connectors assigned
• At time of purchase, the settings of the different input sources are as
to the input sources.
shown below.
BD DVD VCR
Input source
SAT GAME AUX1
Default
AUX2 TV CD
setting
Input source
Default
setting
COMP COMP (Component video) 1, 2
(Component video) None : Do not assign a component video input connector to the selected
Set this to change the input source.
component video input
• At time of purchase, the settings of the different input sources are as
connectors assigned to the
shown below.
input sources.
Input source
BD DVD VCR
SAT GAME AUX1 Default
setting
AUX2 TV
Input source
Default
setting
An input source to which an component video input connector cannot
be assigned is displayed as "– – –".
Default Yes : Reset to the defaults.
The "Input Assign" settings No : Do not reset to the defaults.
are returned to the default
If you select "Default" and press
settings.
message "Return all settings to the default?"
is displayed. Select "Yes" or "No", and then
ENTER
press
BD
Setting details
BD DVD VCR SAT
COAX COAX
None None
1 2
AUX1 AUX2 TV CD
OPT OPT
None None
2 1
BD DVD VCR
COMP COMP
None
1 2
GAME AUX1 AUX2
None None None
ENTER
, the
.
Video
Set the source video.
z "GAME", "AUX2" or "TV" can be set when "HDMI"
been assigned.
Setting items
GAME
Video Select Source : Play the picture and sound of the input source.
Video of another input BD / DVD / VCR / SAT / GAME / AUX1 / AUX2 / TV : Select video input
None
source is played back source to view. This can be set for individual input sources.
combined with the playing
audio.
• "GAME", "AUX2" and "TV" can be selected only when a component
• Buttons on the remote control unit can be used for operations.
• It is not possible to select HDMI input signals.
SAT
• Input sources for which "Delete" is selected
None
Auto : Process video automatically based on the HDMI content
Video Mode
TV Make settings for video information.
processing. Game : Always process video appropriate for game content.
Movie : Process video normally.
None
BD DVD VCR
GAME z
SAT
• If "Video Mode" is set to "Auto", the mode is switched according to the
AUX2 z
AUX1
z
TV
• If a source is played in both MAIN ZONE (audio and video) and ZONE2
89
Default settings are underlined.
(vpage 88) or "COMP"
Setting details
video is assigned as an input source.
AMP
q Press to set the remote control unit to
AMP-operation mode.
V.SEL
w Press until the desired picture appears.
V.SEL
• To cancel, press to select "Source".
NOTE
at "Source Delete" (vpage 112) cannot be
selected.
input contents.
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to "Game" mode may improve audio synchronization.
SOURCE SELECT
(vpage 89) has
vSee overleaf