Connecting A External Power Amplifier - Marantz SR6006 Owner's Manual

Connecting a external power amplifier

• You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT
connector. Adding a power amp to each of the channels provides an even greater sound presence.
• Select the terminal to use and connect the device.
Cables used for connections
Audio cable (sold separately)
L
Audio cable
R
Audio cable
Subwoofer Power amplifier
AUDIO AUDIO
SUB- FRONT CENTER SURROUND
SUB-
WOOFER WOOFER
2 1
L R L R
L R L R
L R L R
L
R
SURROUND
BACK
L R
L R
L R
• When using just one surround back speaker, connect it to the left channel (L) terminal.
• Use the volume control on the subwoofer to control subwoofer volume.
• If the subwoofer volume sounds low, use the volume control provided on the subwoofer to adjust the
volume.
NOTE
• When external power amplifier have been connected to PRE OUT terminals, do not connect the speakers
to the speaker terminals.
• Depending on the settings in the "Amp Assign"
output from the SBL terminal or SBR terminal of the PRE OUT terminal differs.
18
(vpage 101) menu or listening mode, the channel