Specifications - Marantz SR6006 Owner's Manual

Specifications

n Audio section
• Power amplifier
Rated output: Front:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Center:
110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround back:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Front:
Maximum effective output power:
190 W + 190 W (6 Ω, 1 kHz with 10 % T.H.D.)
Center:
190 W (6 Ω, 1 kHz with 10 % T.H.D.)
Surround:
190 W + 190 W (6 Ω, 1 kHz with 10 % T.H.D.)
Surround back:
190 W + 190 W (6 Ω, 1 kHz with 10 % T.H.D.)
Output connectors: 6 – 8 Ω (SPEAKER A+B: 8 Ω)
• Analog
Input sensitivity/Input impedance: 200 mV/47 kΩ
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N: 100 dB (IHF–A weighted, DIRECT mode)
0.005 % (20 Hz – 20 kHz) (DIRECT mode)
Distortion:
Rated output: 1.2 V
• Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input: Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
±1 dB (20 Hz to 20 kHz)
RIAA deviation:
S/N: 74 dB (A weighting, with 5 mV input)
Rated output: 150 mV
Distortion factor: 0.03 % (1 kHz, 3 V)
n Video section
• Standard video connectors
Input/output level and impedance:
Frequency response:
• Color component video connector
Input/output level and impedance:
Frequency response:
n Tuner section
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N:
Total harmonic Distortion:
n General
Power supply:
Power consumption:
For purposes of improvement, specifications and design are subject to change without notice.
145
1 Vp-p, 75 Ω
5 Hz – 10 MHz — 0, –3 dB (when "Video Convert" set to "OFF")
Y (brightness) signal — 1 Vp-p, 75 Ω
P / C signal — 0.7 Vp-p, 75 Ω
B B
P / C signal — 0.7 Vp-p, 75 Ω
R R
5 Hz – 60 MHz — 0, –3 dB (when "Video Convert" set to "OFF")
[FM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10 –15 W)
87.5 MHz – 108.0 MHz 522 kHz – 1611 kHz
1.2 μV (12.8 dBf) 18 μV
MONO 2.0 μV (17.3 dBf)
STEREO 34.5 μV (42 dBf)
MONO 72 dB (IHF–A weighted)
STEREO 67 dB (IHF–A weighted)
MONO 0.3 % (1 kHz)
STEREO 0.7 % (1 kHz)
AC 230 V, 50/60 Hz
650 W
0.2 W (Standby)
2.2 W (CEC standby)
[AM]