Making The Network Settings (Network Setup) - Marantz SR5006 Owner's Manual

Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey ®
Auto Setup.
1
ui
Use to select "Parameter Check" and then press
Auto Setup
Auto Setup Sp. Config. Check
Parameter Check Distance Check
Ch. Level Check
Crossover Check
EQ Check
2
Use ui to select the item you want to check, then press
or p .
Measurement results for each speaker are displayed.
Sp. Config. Check
Check the speaker configuration.
Distance Check Check the distance.
Ch. Level Check Check the channel level.
Crossover Check Check the crossover frequency.
EQ Check Check the equalizer.
• If "EQ Check" is selected, press ui to select equalizing curve ("Audyssey" or "Audyssey Flat") to
be checked.
Use o p to switch the display between the different speakers.
3
Press RETURN .
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey ® Auto Setup settings
If you set "Restore" to "Yes", you can return to Audyssey ® Auto Setup measurement result (value
calculated at the start by MultEQ ® XT) even when you have changed each setting manually.
Set up speakers (Audyssey ® Auto Setup)
ENTER
.
Parameter Check
Sp. Config. Check
Distance Check
Ch. Level Check
Crossover Check
EQ Check
Restore
ENTER
25
Making the network settings
(Network Setup)
This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and
still image (JPEG) files stored on a computer.
1
Connect the Ethernet cable (vpage 18
2
Turn on this unit (C page 5 "Getting
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in "Network
Connect." (vpage 97).
"Connecting to a home network (LAN)").
Started").