Marantz SR6006 Owner's Manual page 140

Video signal resolution conversion table
When "Video Convert" (vpage 90) is set to "ON", "i/p Scaler" (vpage 90) is set to "Analog", "Analog & HDMI" or "HDMI" are set, the resolution of the input video signal can be converted to a different
resolution for output (vpage 5 "Converting input video signals for output (Video conversion function)").
The relationship between the resolution of the convertible video signal and HDMI output resolution is shown in the table below.
Input resolution
NTSC/NTSC4.43/PAL-M/PAL-60
Video Input
PAL/PAL-N/SECAM
480i
576i
480p
576p
1080i 60Hz
Component video input
1080i 50Hz
720p 60Hz
720p 50Hz
1080p 60Hz
1080p 50Hz
480i
576i
480p
576p
1080i 60Hz
HDMI Input 1080i 50Hz
720p 60Hz
720p 50Hz
1080p 24Hz
1080p 60Hz
1080p 50Hz
NOTE
• Video/component video output is output at the same resolution as the input video signal resolution.
• The 3D, Computer resolution, "x.v.Color", sYCC601 color, Adobe RGB color or Adobe YCC601 color input to HDMI is output at the same resolution as the input video signal.
• If 1080p 24Hz signals input from the HDMI terminal are converted into 1080p 60Hz/1080p 50Hz for output, they are output according to the specified "Format"
"NTSC" – Output as 1080p 60Hz.
"PAL" – Output as 1080p 50Hz.
• You can not convert 60Hz into 50Hz or vice versa.
• When "Video Mode" in the menu is set to "Game" or "Auto" and game contents are played, the same resolution as the input video signal is output.
• When "Resolution" in the menu is set to "Auto", the number of pixels in the television panel connected to the HDMI output connector is automatically detected, and the optimum resolution is output according to
the table above.
Output resolution
480i/576i z1
S (480i)
S (576i)
S (480i)
S (576i)
–
–
–
–
–
–
–
–
S (480i)
S (576i)
–
–
–
–
–
–
–
–
–
S The resolution set in "Resolution" (vpage 90) in the menu is output.
( ) The resolution inside ( ) is output.
– Output at the same resolution as the input video signal resolution.
z1 Only output when "i/p Scaler" in the menu is set to "OFF".
z2 The resolution set in "Resolution" (vpage 90) in the menu is set to "Auto", and a television that does not support 1080p 24Hz video signals is connected.
z3 The resolution set in "Resolution" (vpage 90) in the menu is set to "Auto", and a television that supports 1080p 24Hz video signals is connected.
137
HDMI Output
480p/576p 1080i
S (480p) S
S (576p) S
S (480p) S
S (576p) S
S (480p) S
S (576p) S
–
S
– S
– S
–
S
– –
– –
S (480p) S
S (576p) S
S (480p) S
S (576p) S
–
S
–
S
–
S
– S
– –
– –
– –
Relationship between video signals and monitor output
720p 1080p 1080p 24Hz
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
–
S
–
S
S S
S S
S S
S S
S S
S S
S S
S S
S z2
–
–
S
–
S
setting in the menu:
(vpage 112)
S
–
S
–
S
–
S
–
S
–
S
–
S
–
S
–
S
–
S
–
S z3
S
–