Marantz SR6006 Owner's Manual page 101

n A-DSX Soundstage
Adjust Audyssey DSX™ setting and sound stage parameters.
Setting items
Audyssey DSX™ ON–Height– : Turn on A-DSX processing for height expansion.
Provides more immersive ON–Wide– : Turn on A-DSX processing for wide expansion.
surround sound by adding OFF : Do not set Audyssey DSX™.
the new channels.
Stage Height –10 – +10 (0)
Adjust sound stage height
when using front height
• "Audyssey DSX™" can be set when you are using front height speakers
speakers.
or front wide speakers.
• "Audyssey DSX™" is only valid when using a center speaker.
• "Audyssey DSX™" is valid when surround mode is AUTO mode other
than PLgz Height.
• "A-DSX Soundstage" cannot be configured if the HD Audio source being
played includes Front height and Front wide channels. In this case, the
respective channels are played back using the input signals.
About Audyssey Dynamic Surround Expansion (A-DSX)
Audyssey DSX™ is a scalable surround expansion system that adds
new channels to improve the surround impression. Based on research
in human hearing Audyssey DSX™ adds a pair of Wide channels in the
front because that information is critical in the rendering of a realistic
soundstage.
Audyssey DSX™ then adds a pair of Height channels above the main
front channels to reproduce the next most important acoustical and
perceptual cues related to soundstage depth. In addition to creating
these new channels, Audyssey DSX™ applies Surround Envelopment
Processing to enhance the blend between the front and side/back
surround channels. The result is a much more seamless and enveloping
home theater experience.
Stage Width –10 – +10 (0)
Adjust sound stage width
when using front wide
speakers.
BD
Default settings are underlined.
Setting details
Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ ® XT" setting (vpage 96) is "Manual".
Setting items
Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ ® XT.
• "Curve Copy" is displayed after Audyssey ® Auto Setup has been
performed.
• When you select "Curve Copy" and press
Audyssey Flat?" prompt is displayed. Select either "Yes" or "No", and
ENTER
press
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
When you select "Default" and press
settings.
the "Return all settings to the default?"
prompt is displayed. Select either "Yes" or
"No", and press
Adjust Channel q Select the speaker tone adjustment method.
Correct the tone of each All : Adjust the tone of all speakers together.
speaker.
L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
98
AUDIO/VIDEO ADJUST
Default settings are underlined.
Setting details
ENTER
, the "Set EQ curve to
.
ENTER
,
ENTER
.