Dual Backup Memory Function; Panel Lock Function - Marantz SR6006 Owner's Manual

Dual backup memory function

The unit stores settings information in nonvolatile memory even when the main power supply is turned off. Using the Dual Backup Memory
function, you can write settings information to another memory area to back up saved settings for recovery anytime as needed.
n Remembering set details (Backup)
STATUS
M-DAX
Set the unit in the state you want remembering, and press
M-DAX STATUS
and hold and for at least 3 seconds.
"MEMORY SAVING" is shown in the display, and the setting details
are remembered.
NOTE
• The volume is not remembered.
• If remembered details are overwritten, the previously remembered
contents are deleted.
BD
n Recalling remembered details (Recovery)
DISPLAY
M-DAX
Press and hold M-DAX and DISPLAY
3 seconds.
"MEMORY LOAD" is shown in the display, and the remembered
details are recalled.
NOTE
• If there is no remembered data, "NO BACKUP" is shown in the
display, and no remembered details are recalled.
• As the volume cannot be recalled, it returns to the factory setting
volume.
77

Panel lock function

To prevent accidental operation of this unit, you can disable operation
of the buttons on the front panel.
ON/STANDBY
PURE DIRECT
n Disabling all key button operations
Press ON/STANDBY
together for at least
DIRECT DISPLAY
and
"FP Lock!" appears on the display and all button operations except
ON/STANDBY
are disabled.
n Disabling all button operations except VOLUME
Press ON/STANDBY
DIRECT STATUS
and
"FP Lock!" appears on the display and all button operations except
ON/STANDBY
and
n Canceling the Panel lock function
ON/STANDBY
Press
DIRECT and ZONE SELECT
mode.
The Panel lock function is canceled.
Even when the Panel lock function is set, you can operate the unit
using the remote control unit.
Convenient functions
DISPLAY VOLUME
STATUS ZONE SELECT
while you press and hold PURE
with the unit in standby mode.
while you press and hold PURE
with the unit in standby mode.
VOLUME
are disabled.
PURE
while you press and hold
with the unit in standby