Marantz SR6006 Owner's Manual page 117

Setting items
Setup Lock ON : Turn protection on.
Protect settings from OFF : Turn protection off.
inadvertent change.
When canceling the setting, set "Setup Lock" to "OFF".
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "Setup Lock!" is displayed if you attempt to
operate related settings.
• Menu operations
• M-DAX
• HT-EQ
Firmware Update Check for Update : Check for firmware updates. You can also check
Update the firmware of the approximately how long it will take to complete an update.
receiver. Start : Execute the update process.
When updating starts, the power indicator becomes red and the menu
screen is shut down. The amount of update time which has elapsed is
displayed.
• If updating fails, the set automatically retries, but if updating is still not
possible, one of the messages shown below is displayed. If the display
reads as shown below, check the settings and network environment,
then update again.
Display
Updating fail
Login failed
Server is busy
Connection fail
Download fail
BD
Setting details
• Channel Level
• Dynamic Volume ®
• Display settings
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure in connecting to server.
Downloading of the firmware has failed.
Setting items
Add New Feature Upgrade : Execute the upgrade process.
Display new features that When updating starts, the power indicator becomes red and the menu
can be downloaded to this screen is shut down. The amount of update time which has elapsed is
unit and perform an update. displayed.
• If the upgrade is not successful, an error message identical to those in
"Firmware Update" will appear on the display. Check the settings and
network environment, then update again.
Upgrade Status : Display a list of the additional functions provided by the
upgrade.
See the marantz website for details about updates.
When the procedure is complete, "Registered" is displayed in this
menu and updates can be carried out. If the procedure has not been
carried out, "Not Registered" is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main
unit's
114
Setting details
ZONE SELECT DISPLAY
and for at least 3 seconds.
SYSTEM SETUP
vSee overleaf