Zone Setup - Marantz SR6006 Owner's Manual

Zone Setup

Set the audio to play back with multi-zone (ZONE2, ZONE3).
Setting items
Bass –10dB – +10dB (0dB)
Adjust low frequency range
(bass).
Treble –10dB – +10dB (0dB)
Adjust high frequency range
(treble).
HPF ON : The low range is attenuated.
Make settings for cutting OFF : The low range is not attenuated.
the low range to reduce
distortion in the bass.
Lch Level –12dB – +12dB (0dB)
Adjust the left channel
The "Lch Level" can be set when "Channel" (vpage 111) is set to
output level.
"Stereo".
Rch Level –12dB – +12dB (0dB)
Adjust the right channel
The "Rch Level" can be set when "Channel" (vpage 111) is set to
output level.
"Stereo".
Channel Stereo : Select stereo output.
Set the signal output from Mono : Select mono output.
multi-zone.
BD
Default settings are underlined.
Setting details
Setting items
Volume Level Variable : Volume adjustment is enabled by main unit and remote control
Set the volume output level. unit.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amplifier.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amplifier.
When "Amp Assign" (vpage 101) is set to "ZONE2" or "ZONE3",
the "Volume Level" setting is automatically set to "Variable".
Volume Limit OFF : Do not set a maximum volume.
Make a setting for –20dB (61) / –10dB (71) / 0dB (81)
maximum volume.
This is displayed from 0 to 99 when "Volume Display" (vpage 112)
is set to "Absolute".
Last : Use the memorized setting from the last session.
Power On Level
Define the volume setting – – – (0) : Always mute when power is turned on.
that is active when the –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
power is turned on.
This is displayed from 0 to 99 when "Volume Display" (vpage 112)
is set to "Absolute".
Mute Level Full : The sound is muted entirely.
Set the amount of –40dB : The sound is attenuated by 40 dB down.
attenuation when muting –20dB : The sound is attenuated by 20 dB down.
is on.
111
SYSTEM SETUP
Setting details