Marantz SR6006 Owner's Manual page 104

Speaker Setup
Perform when setting the speakers manually or when changing settings made in Audyssey ® Auto Setup.
• If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to select
Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® (vpage 96).
• "SYSTEM SETUP" can be used without changing the settings. Please set if necessary.
Setting items
Amp Assign NORMAL : Select the "NORMAL" setting to perform 7.1-channel playback
The signal output from the using the surround back, front height, or front wide speakers.
SURR.BACK/AMP ASSIGN ZONE2 : Select the "ZONE2" setting to assign the unit's built-in power
speaker terminal of this unit amplifier for ZONE2 and output the audio in stereo.
can be switched to match ZONE3 : Select the "ZONE3" setting to assign the unit's built-in power
your speaker environment. amplifier for ZONE3 and output the audio in stereo.
SPKR-C : Select the "SPKR-C" setting to connect the front speakers via
the bi-amp connection.
F.Height : Select the "F.Height" setting to use the front height speaker
for playback.
F.Wide : Select the "F.Wide" setting to use the front wide speaker for
playback.
Speaker Config. Front : Set the front speaker size.
Select speaker configuration • Large : Use a large speaker that can adequately play back low
and size (bass reproduction frequencies.
capability). • Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
NOTE
Do not use the outward
• When "Subwoofer" is set to "No", "Front" is automatically set to
shape of the speaker to
"Large".
determine selection of a
• When "Front" is set to "Small", "Center", "Surround", "Surr.Back",
"Large" or "Small" speaker.
"Front Height" and "Front Wide" can not be set to "Large".
Instead, use the frequencies
set in "Crossover Freq."
(vpage 104) as the
standard for determining
bass reproduction capability.
BD
Default settings are underlined.
Setting details
101
Setting items
Speaker Config. Center : Set the presence and size of the center speaker.
(Continued) • Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Surround : Set the presence and size of the surround speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround speakers are not connected.
• When "Surround" is set to "Large", "Surr.Back", "Front Height" and
"Front Wide" can be set to "Large".
• When "Surround" is set to "None", "Surr.Back", "Front Height" and
"Front Wide" are automatically set to "None".
SYSTEM SETUP
Setting details
vSee overleaf