Marantz SR6006 Owner's Manual page 9

GFlow of video signals for ZONE2H
Video device
Input
(IN)
Output
Video connector Video connector
in Set as Necessary
• Set when not using the video conversion function.
"Video Convert" (vpage 90)
• Set when changing the resolution of the video signal.
"Resolution" (vpage 90)
• The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60
formats.
• The resolution of the video signal output from the HDMI connector of this unit is set in "Resolution"
(vpage 90) in the menu.
• Resolutions of HDMI-compatible TVs can be checked at "HDMI Information" – "Monitor 1" or "Monitor
2" (vpage 116).
NOTE
• HDMI signals cannot be converted into analog signals.
• When a non-standard video signal from a game machine or some other source is input, the video
conversion function might not operate.
• 480p/576p/1080i/720p/1080p component video input signals cannot be converted into Video format.
This unit
Monitor (TV)
Output
(MONITOR OUT) Input
Video connector Video connector
Examples of screen display
• Menu screen • Status display screen
When the input source is
switched.
AUDIO/VIDEO ADJUST
Audio Adjust
Picture Adjust
SOURCE
Adjust various audio and video parameters
SURROUND
Status display: The operating status appears briefly on the screen
NOTE
• The status display screen cannot be displayed at a computer's resolution (e.g. VGA) or while certain 3D
video contents is being played.
• When the menu is operated on a computer's resolution (e.g. VGA) or during playback of certain 3D video
content, the playback image switches to the menu screen image.
6
Important information
When the volume is adjusted.
AUTO
BD
DTS SURROUND
when the input source is switched or the volume is
changed.
-52.0dB