Check The Registered Preset Code - Marantz SR6006 Owner's Manual

Check the registered preset code

1
Press and hold down the input
source select buttons for the
appliance to control, and press
SET until the SEND indicator
blinks.
2
SEARCH/INFO
Press .
The LEARN indicator blinks twice.
3
To view the code for first digit,
1
press .
Count the number of times the LEARN
indicator blinks (e.g. 3 blinks = 3) and
write down the number.
• If a code digit is "0", the LEARN indicator
does not blink.
4
2
Then press to check the second
digit of the code. Now press 3 and
4
to check the third and fourth
digits of the code.
Registering preset codes
Default settings for preset codes
The devices shown below are registered for each input source button
as default. Settings can be changed according to the devices to be
used.
1
Press and hold down the input
source select buttons for the
appliance to control, and press
SET until the SEND indicator
blinks.
2
Enter the appropriate preset
code (4 digits) from the table
below.
The LEARN indicator blinks twice.
Input source
select Category
buttons
Blu-ray Disc player
DVD player
Television
Satellite set top box
NOTE
After this procedure, the selected source reset to its initial code.
120
Preset
Brand
code
marantz 5000
marantz 2000
marantz 1000
marantz 4000