Marantz SR6006 Owner's Manual page 93

Setting items
Video Convert ON : The input video signal is converted.
The input video signal is OFF : The input video signal is not converted.
converted automatically
in conjunction with
• When a non-standard video signal from a game machine or some other
the connected TV
source is input, the video conversion function might not operate. In this
(vpage 5 "Converting
case set "Video Convert" to "OFF".
input video signals for
• When "Video Convert" is set to "OFF", the video conversion function
output (Video conversion
does not work. In this case, connect this unit and TV with the same type
function)").
of cable.
BD DVD VCR
GAME z
SAT
AUX2 z
AUX1
z
TV
i/p Scaler Analog : Use i/p scaler function for analog video signal.
Convert the input source's Analog & HDMI : Use i/p scaler function for analog and HDMI video signal.
resolution to the resolution HDMI : Use i/p scaler function for HDMI video signal.
set at "Resolution". OFF : Do not use i/p scaler function.
BD DVD VCR
• "Analog & HDMI" and "HDMI" can be set for input sources for which an
GAME z
SAT
HDMI input connector is assigned.
AUX2 z
AUX1
• Which items can be set depend on the input source assigned to each
z
TV NET/USB input connector.
• This function is not effective when the input signal is "x.v.Color", 3D,
sYCC 601 color, Adobe RGB color, Adobe YCC 601 color or computer
resolution.
BD
Setting details Setting items
Resolution Auto : The number of pixels the TV connected to the HDMI output
Set the output resolution. connector supports is detected automatically and the appropriate output
You can set "Resolution" resolution is set.
separately for HDMI output 480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output resolution.
of the analog video input
and HDMI input.
• This item can be set when "i/p Scaler" is set to anything other than
"OFF".
BD DVD VCR
• When "i/p Scaler" is set to "Analog & HDMI", the resolution of both the
GAME z
SAT
analog video input signal and HDMI input signal can be set.
AUX2 z
AUX1
• To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video
z
TV NET/USB signals.
• When set to "1080p:24Hz", you can enjoy film-like pictures for film
sources (in 24 Hz). For video sources and mixed sources, we recommend
setting the resolution to "1080p".
• It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output
at a resolution of 1080p/50Hz.
Progressive Mode Auto : The video signal is automatically detected and the appropriate
Set an appropriate mode is set.
progressive conversion Video1 : Select mode suitable for video playback
mode for the source video Video2 : Select mode suitable for video and 30-frame film material
signal. playback.
This item can be set when "i/p Scaler" is set to anything other than
BD DVD VCR
"OFF".
GAME z
SAT
AUX2 z
AUX1
z
TV
Aspect Full : Output at 16:9 aspect ratio.
Set the aspect ratio for the Normal : Output at 4:3 aspect ratio.
video signals output to the
"Aspect" can be set when "i/p Scaler" is set to anything other than
HDMI.
"OFF".
BD DVD VCR
GAME z
SAT
AUX2 z
AUX1
z
TV NET/USB
z "GAME", "AUX2" or "TV" can be set when "HDMI"
been assigned.
90
SOURCE SELECT
Setting details
(vpage 88) or "COMP" (vpage 89) has