Marantz SR6006 Owner's Manual page 94

Input Mode (Audio)
The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
It is normally recommended 7.1CH IN : Only signals input from the 7.1CH IN connector will be played
to set the audio input mode back.
to "Auto".
• "HDMI" can be set for input sources for which "HDMI" is assigned at
"Input Assign" (vpage 88).
• "Digital" can be set for input sources for which "DIGITAL" is assigned
at "Input Assign" (vpage 89).
• If the input source is set to "GAME" or "TV", it cannot be set to
"Analog".
• The surround mode cannot be set if the input mode is set to "7.1CH IN".
• If "HDMI Control" – "Control" is set to "ON" and a TV compatible with
the ARC is connected via the HDMI MONITOR connectors, the input
mode whose input source is "TV" is fixed to ARC.
Decode Mode Auto : Detect type of digital input signal and decode and play automatically.
Set the audio decode mode PCM : Decode and play only PCM input signals.
for input source. DTS : Decode and play only DTS input signals.
BD DVD VCR
• This item can be set for input sources for which "HDMI" or "DIGITAL"
SAT GAME AUX1
is assigned at "Input Assign" (vpage 88).
AUX2 TV CD
• Normally set this mode to "Auto". Set "PCM" and "DTS" when
inputting the corresponding input signal.
BD
Default settings are underlined.
Setting details
Rename
Change the display name of the selected input source.
Setting items
Rename • Up to eight characters can be input.
Change the display name of • For character input, see page 85.
the selected input source.
Default Yes : Reset to the defaults.
The input source name No : Do not reset to the defaults.
is returned to the default
If you select "Default" and press
setting.
message "Return all settings to the default?"
is displayed. Select "Yes" or "No", and then
press
Source Level (Audio)
• This function corrects the playback level of the selected input source's audio input.
• Make this setting if there are differences in the input volume levels between the different sources.
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which "HDMI" or "DIGITAL" is assigned at "Input Assign" (vpage 88).
Play
Displays the playback screen of each input source.
NET/USB Favorites Internet Radio Media Server
91
Setting details
ENTER
, the
ENTER
.
Default settings are underlined.
Setting details
USB/iPod Flickr Napster TUNER
SOURCE SELECT