Marantz SR6006 Owner's Manual page 137

n Types of input signals, and corresponding surround modes
This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode.
Symbols in the table
S This indicates the selectable surround mode.
Surround mode (vpage 50) NOTE
DTS SURROUND
DTS-HD MSTR
DTS-HD HI RES
DTS ES DSCRT6.1 z1z3
DTS ES MTRX6.1 z1z3
DTS SURROUND
DTS 96/24
DTS (–HD) + PLgx MOVIE z2z3
DTS (–HD) + PLgx MUSIC z1z3
DTS (–HD) + PLgz z4
DTS EXPRESS
DTS (–HD) + NEO:6 z1z3
DTS NEO:6 CINEMA
DTS NEO:6 MUSIC
DOLBY SURROUND
DOLBY TrueHD
DOLBY DIGITAL+
DOLBY DIGITAL EX z1z3
DOLBY (D+) (HD) +EX z1z3
DOLBY DIGITAL
DOLBY (D) (D+) (HD) +PLgx MOVIE z2z3
DOLBY (D) (D+) (HD) +PLgx MUSIC z1z3
DOLBY (D) (D+) (HD) +PLgz z4
DOLBY PRO LOGIC gx MOVIE z1z3
DOLBY PRO LOGIC gx MUSIC z1z3
DOLBY PRO LOGIC gx GAME z1z3
DOLBY PRO LOGIC gz z4
DOLBY PRO LOGIC g MOVIE
DOLBY PRO LOGIC g MUSIC
DOLBY PRO LOGIC g GAME
DOLBY PRO LOGIC
z1 If "Speaker Config." – "Surr.Back" (vpage 102) is set to "None", this surround mode cannot be selected.
z2 If "Speaker Config." – "Surr.Back" (vpage 102) is set to "1spkr" or "None", this surround mode cannot be selected.
z3 This surround mode can be selected when "Amp Assign" (vpage 101) is set to "NORMAL".
z4 If "Speaker Config." – "Front Height" (vpage 102) is set to "None", this surround mode cannot be selected.
PCM DTS-HD
DTS-HD DTS-HD High
ANALOG
PCM PCM
Master Resolution
(multi ch) (2ch)
Audio Audio
S
S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
Input signal types and formats
DTS
DTS ES DTS ES
DTS DTS
DSCRT MTRX DTS 96/24
EXPRESS (5.1ch)
(With Flag) (With Flag)
S
S
S S S
S
S S S S
S S S S
S S S S S
S
S S S S
134
DOLBY DOLBY DIGITAL
DOLBY DIGITAL
DOLBY DOLBY DOLBY DIGITAL DOLBY DIGITAL
EX (With no
TrueHD DIGITAL Plus EX (With Flag) (5.1/5/4ch/3ch)
Flag)
S
S
S S
S S
S S
S S S S
S S S S
S S S S
Surround
DOLBY DIGITAL
(2ch)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S