Making The Network Settings (Network) - Marantz NR1604 Owner's Manual

Check Results
This function enables you to check the measurement results and equalizer characteristics after Audyssey ®
Setup.
1
SETUP
Press to display the menu on the TV screen.
2
u to select "Speakers" – "Audyssey ® Setup" and then press
Use
3
i
Use to select "Check Results" and then press
Audyssey Setup
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone.
Set the following items
if necessary.
Amp Assign
Channel Select
Check Results
Restore...
Start
4
ui
Use to select the item you want to check, then press
Measurement results for each speaker are displayed.
Check the speaker configuration.
Speaker Config.
Check the speaker distance.
Distances
Check the speaker channel level.
Levels
Check the speaker crossover frequency.
Crossovers
Equalizers Check the equalizer.
ui
• If "Equalizers" is selected, press to select equalizing curve ("Audyssey" or "Audyssey Flat") to
be checked.
Use ui to switch the display between the different speakers.
5
o BACK
Press or .
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey ® Setup settings
If you set "Restore..." to "Restore", you can return to Audyssey ® Setup measurement result (value
calculated at the start by MultEQ ® ) even when you have changed each setting manually.
DVD
Set up speakers (Audyssey® Setup)
ENTER p
or .
ENTER
.
Check Results
Check Audyssey Setup Measurement results.
Speaker Config.
Distances
Levels
Crossovers
Equalizers
ENTER
.
28
Making the network settings
(Network)
This unit can be connected to a home network (LAN) to listen to Internet Radio or play back music files and
still image (JPEG) files stored on a computer.
1
Connect the LAN cable (vpage 20
2
Turn on this unit (vpage 29).
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in "Settings"
(vpage 129).
"Connecting to a home network (LAN)").