Marantz SR6006 Owner's Manual page 118

Notes concerning use of "Firmware Update" and "Add New Feature"
• In order to use these functions, you must have the correct system requirements and settings for a
broadband Internet connection (vpage 19).
• Do not turn off the power until updating or upgrading is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/
upgrading procedure to be completed.
• Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/
upgrading is completed.
• Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc. set
for this unit.
• If the update or upgrade fails, press and hold the
seconds, or remove and re-insert the power cord. "Update retry" appears on the display and update
restarts from the point at which update failed. If the error continues despite this, check the network
environment.
• Information regarding the "Firmware Update" function and "Add New Feature" will be announced on
the marantz web site each time related plans are defined.
• When usable new firmware is released with "Firmware Update" or "Add New Feature", a notification
message is displayed on the menu screen. When you do not want to be notified, set "Update Notification"
(vpage 110) and "Upgrade Notification" (vpage 110) to "OFF".
Setting items
Maintenance Mode
NOTE
Use when receiving
Only use this function if so instructed by a marantz serviceperson or
maintenance from a marantz
installer.
service engineer or custom
installer.
BD
ON/STANDBY
on the main unit for more than 5
Setting details
Language
Set the language for display on the menu screen.
English / Deutsch / Français
"Language" can also be set by the following procedure. However, the menu screen is not displayed.
ZONE SELECT
1. Press and hold the main unit's
"Video Format" appears on the display.
STATUS
2. Press the main unit's and set "GUI Language".
INTERNET RADIO
3. Press the main unit's
PURE DIRECT
4. Press the main unit's to complete the setting.
115
SYSTEM SETUP
Default settings are underlined.
Setting details
STATUS
and for at least 3 seconds.
ONE TOUCH PLAY
or and set the language.