Displaying Persistent Binding settings through BCU
Use the pbind --list BCU command to query the list of mappings for persistent binding on a specific
port.
pbind --list <port_id> <pwwn>
where:
port_id
pwwn
Displaying Persistent Binding settings through HCM
Launch the Persistent Binding dialog box as follows to determine SCSI target ID mappings:
1. Launch the HCM.
2. Select an adapter, host, DCB port, or FCoE port from the device tree.
3. Launch
4. Select Configure > Persistent Binding. > View Persistent Binding.
Adapter properties
Display properties for the following using HCM:
•
•
CNA Properties
Following are the some of the properties that you can display for CNAs or Fabric Adapter ports
configured in CNA mode:
•
•
•
•
•
•
•
•
•
•
•
•
•
Brocade Adapters Troubleshooting Guide
53-1002145-01
ID of the port for which you want to display settings.
Port World Wide Name
CNAs or Fabric Adapter ports configured in CNA mode.
HBAs or Fabric Adapter ports configured in HBA mode.
MAC address
Adapter name
Operating status
Vendor ID
PCIe generation
Subsystem vendor ID
Serial number
Manufacturer
Model description
Maximum speed supported
Number of ports
OEM information
Card type
Adapter properties
3
109