Dell Brocade Adapters Troubleshooting Manual page 151

HCM and Installer Message Reference
This appendix provides details on messages that display during operation of the Host Connectivity
Manager (HCM) and Brocade Adapter Software Installer program. The following tables in this
appendix provide reasons why these messages display and actions that you should take to resolve
any problems associated with the messages:
•
•
TABLE 14
Message
A maximum of eight
ports are allowed in a
team.
A maximum of three IP
addresses are allowed.
Add Team failed.
<Runtime Reason>
Add Team failed. Given
adapter is part of
another Team or VLANS
exist.
After driver file upload,
older agent is
stopped.\nDriver update
is started.
Add Team failed due to
an unexpected error.
<Runtime Reason>
All pending test(s) will be
stopped. Started test(s)
will continue to run until
they are finished. Do you
really want to close the
window?
Brocade Adapters Troubleshooting Guide
53-1002145-01
Table 14 provides details on messages that display during operation of the Host Connectivity
Manager (HCM). Causes for each message and actions that you should perform are provided.
Table 15 on page 137 provides details on messages that display during operation of the
Brocade Adapter Software Installer program. Causes for each message and actions that you
should perform are provided.
Host Connectivity Manager messages
Cause
Occurs when the user tries to create a team
with more than eight ports.
Occurs when more than three IP addresses are
entered in the Syslog Server Configuration
dialog box.
Occurs when addition of team failed due to
runtime error.
Occurs when the user tries to create a team
using an adapter for which are VLANs
configured.
Older Agent stops after the driver upload.
Adding a team failed due to an unexpected
error.
Occurs when the user stops a diagnostics test
before it finishes.
Appendix
Corrective Action or Notes
Create a team with eight or fewer
ports.
Configure three or less IP
addresses.
•
Refer to the runtime reason.
•
Refer to HCM logs.
•
Verify if the team was already
added.
Do not create team when VLANs are
configured.
Information message.
Determine why the error happens
when adding a team.
Do not stop the test until it finishes.
B
127