Dell Brocade Adapters Troubleshooting Manual page 153

TABLE 14
Message
Choose any of the event
severity levels to filter.
Clear Filter cannot be
performed while the
Event Properties dialog is
open.
Could not validate the
selected file as it does
not have meta data
information.\nAre you
sure you want to
continue?
Dialog cannot be closed
since the driver
update\no-operation is
in progress.
Data Pattern for PCI
Loopback Test cannot be
empty. Enter valid data.
Data has been entered in
preparation for adding a
name but the name was
not added. Do you want
to add that name before
you exit?
Driver update is
completed.
Driver update is failed
Driver update is
successful.
Driver update is success.
New agent {0} is up.
Duplicate File: <Export
File Name>. Do you want
to replace the file?
Duplicate names still
exists. Click cancel to
discard duplicated
names. Do you want to
continue?
Brocade Adapters Troubleshooting Guide
53-1002145-01
Host Connectivity Manager messages (continued)
Cause
Occurs when the user selects an event severity
level, and then clicks OK in the Master Log
Filter dialog box.
Occurs if the Event Properties dialog is kept
open and the user clicks Clear Filter.
Occurs when the meta data information is
missing in the driver file.
Occurs when the driver update or no-operation
is in progress.
Occurs when the Data Pattern field is left
empty while executing a PCI loopback Test.
Occurs when user configures names in the
following scenario.
1 Modifies name of any adapter or port
2 Enters WWN and name values in the
Detached WWN/MAC and Name fields
3 Clicks OK.
Occurs when the driver update has completed.
Occurs when the driver update fails.
Occurs when the driver update is successful.
Occurs when the driver update is success and
the new agent is running.
Occurs when the user exports names to a file
that already exists.
Occurs when the user selects Cancel button in
Duplicated Names dialog box without making
any changes.
HCM and Installer Message Reference
Corrective Action or Notes
Select at least one severity level
(such as major or minor), and then
click OK in the Master Log Filter
dialog box.
Close the Event Properties dialog
box, and then click Clear Filter to
clear configured filters.
Download a new driver and try
again.
Information message.
Error message.
Verify if the detached WWN/name is
to be added to HCM alias store. If
yes, click Yes to add or No.
Information message.
Information message.
Information message.
Information message.
Try to export the names with a
different file name.
Information message.
B
129