Dell Brocade Adapters Troubleshooting Manual page 157

TABLE 14
Message
Restore data is
successfully completed.
Please restart HCM for
new data to take effect.
Select a valid driver file.
Selected driver file
version {0} is not
supported.
Starting the driver
update...
Successfully updated the
parameters for all ports.
Syslog configuration
failed
System reboot is
required for the newer
driver to take effect
Team name should start
with an alphabet.
Allowed characters are
0-9, A-Z, a-z, hyphen (-)
and underscore (_) and
should not exceed 31
characters.
The adapter will be
disabled for executing
the Memory test. This
will also disable all the
ports and their devices
on the adapter. Are you
sure you want to
continue?
The boot image update
failed: <Runtime
Reason>
The boot image
successfully updated.
You must reboot the
system for the updated
image to be effective.
The change has not been
sent to device. Do you
want to commit the
change?
Brocade Adapters Troubleshooting Guide
53-1002145-01
Host Connectivity Manager messages (continued)
Cause
Occurs upon successful restore of backed-up
HCM data.
Occurs when driver file field is left blank.
Occurs when the selected driver version is not
supported.
Occurs when the driver update starts.
Occurs when the configurations done in the
Basic Port Configuration dialog box are
successfully updated using the Apply button.
Occurs when the user tries to configure a
syslog server using the Syslog Server
Configuration dialog box.
Occurs when the driver update is complete. A
system reboot is required for the new driver to
take effect.
Occurs when the user provides an invalid team
name.
Occurs when the user selects the Memory test
in the Hardware Tests Diagnostics dialog box.
Occurs when a invalid boot code image file is
updated.
Occurs when the boot code image is updated
successfully.
Occurs when user clicks on OK in the Basic
Port Configuration dialog box after making
configuration changes.
HCM and Installer Message Reference
Corrective Action or Notes
Information message.
Select the appropriate driver file.
Use a supported driver.
Information message.
The configuration will be reflected
only after a successful process.
Retry the operation.
Information message.
Make sure the team name starts
with a letter. Allowable characters in
the team name are 0-9, A-Z, a-z,
hyphen (-) and underscore (_).
Click OK to proceed or Cancel to
cancel the operation.
Select a valid boot image file for the
boot image update.
After successful boot image update,
reboot the system.
Select to commit the change or to
not commit the change.
B
133