Dell Brocade Adapters Troubleshooting Manual page 92

3
Adapter event messages
•
NOTE
For details of all driver event messages, refer to
Reference".
Message details are also contained in HTML files, which load your system when you install the
adapter driver. You can view these HTML files using any internet browser application.
provides the default location where these message files install for each supported operating
system.
TABLE 6
Operating System
Linux
VMware
Solaris
Windows
Table 7
TABLE 7
Event Catalog File
bfa_aen_adapter.html
bfa_aen_audit.html
bfa_ethport.html
bfa_aen_ioc.html
bfa_aen_itnim.html
bfa_aen_lport.html
bfa_aen_port.html
bfa_aen_rport.html
hba_error_codes.doc
68
Date and time event occurred
Message catalog location
Catalog Location
/opt/bfa
/opt/bfa
/opt/bfa
aen.zip loaded to your driver installation
directory. Unzip this file to obtain all message
catalog files.
lists the message file names and content for the message files.
Event message files
Appendix A, "Adapter BIOS and Event Message
Content
Adapter events, such as adapter added or
removed
Audit events, such as authentication enabled or
disabled for base port
Base port Ethernet events, such as the Ethernet
link up and link down.
I/O controller (IOC) events.
Initiator-target nexus events.
Logical port events.
Physical base port events.
Remote port (R_Port) events.
List of error codes and meanings for the
following events:
•
Adapter - events relating to the adapter
•
Physical port
•
L_Port - logical port
•
R_Port - remote initiator or target port
•
ITNIM - initiator target nexus
•
Audits
•
IOC - I/O controller
•
Ethernet port
Brocade Adapters Troubleshooting Guide
Table 6
53-1002145-01