Firmware Statistics - Dell Brocade Adapters Troubleshooting Manual

3
Statistics
NOTE
Enabling profiling will impact I/O performance, so use this command to analyze traffic patterns and
not in production systems.
Use the following command to enable profiling.
fcpim --profile_on <port_id>
Use the following command to disable profiling.
fcpim --profile_off <port_id>
where:
port_id

Firmware statistics

Use HCM to display I/O controller (IOC) firmware statistics for the following categories:
•
•
•
•
Use the following steps to display the Firmware Statistics dialog box.
1. Launch the HCM.
2. Select the base adapter port from the device tree window.
3. Click Monitor > Statistics > Firmware Statistics
78
ID of the port for which you want to enable or disable profiling. This could be
the PWWN, port hardware path, or user-specified port name. This could also
be the adapter-index/port-index. For example, to specify adapter 1, port 1,
you would use 1/1 as the port identification.
IOC firmware
IOC Fibre Channel (FC) firmware
Firmware IO (Initiator Mode)
Firmware port FPG
or
Right-click a port from the device tree and select Statistics > Firmware Statistics.
Brocade Adapters Troubleshooting Guide
53-1002145-01