Real-Time And Historical Performance Statistics - Dell Brocade Adapters Troubleshooting Manual

Displaying statistics through BCU
Use the port --stats BCU command to display statistics for a specified adapter port.
port --stats <port_id>
where:
port_id
Displaying statistics through HCM
Use the Port Statistics dialog box to monitor a variety of port data. Launch this dialog box using the
following steps:
1. Launch the HCM.
2. Select the base adapter port from the device tree window.
3. Click Monitor > Statistics > Port Statistics.

Real-time and historical performance statistics

Use HCM to collect and display real-time and historical performance data in graphs for the following
counters.
•
•
•
•
•
•
•
Display statistics for the following managed devices:
•
•
•
•
You can launch graphs for multiple ports to observe the historical trend or real-time behavior of
statistics across multiple ports. You can also change the polling intervals in seconds for collecting
data to display.
To generate a real-time performance graph for a device, use the following steps.
1. Select a device port in the device tree.
2. Select Configure > Performance > Realtime Statistics to display the Realtime Performance
Brocade Adapters Troubleshooting Guide
53-1002145-01
ID of the port for which you want to display statistics. This could be the
PWWN, port hardware path, or user-specified port name. This could also be
the adapter-index/port-index. For example, to specify adapter 1, port 1, you
would use 1/1 as the port identification.
Tx bytes (Mbps)
Rx bytes (Mbps)
Tx drops
Rx drops—The number of dropped received frames
Tx FCS errors
Rx FCS errors
Rx packets
Ports on all adapter types.
Virtual ports
Ethernet ports on the Ethernet node (CNAs and Fabric Adapter ports configured in CNA or NIC
mode)
Remote port (FCP IM statistics)
dialog box.
3
Statistics
83