Vhba Statistics; Vnic Statistics (Cna Or Nic) - Dell Brocade Adapters Troubleshooting Manual

3
Statistics

vHBA statistics

Display vHBA statistics on HBAs, CNAs, or Fabric Adapter ports configured in HBA or CNA mode.
Use HCM and BCU to display statistics related to virtual host bus adapters (vHBA) associated with
an FC or FCoE port. Statistics such as the following display:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Displaying statistics through HCM
To display statistics, perform the following steps:
1. Launch the HCM.
2. Select an FC or FCoE port from the device tree
3. Click Monitor > Statistics > vHBA Statistics.
The vHBA Statistics for FCoE Port dialog box displays.
Displaying statistics through BCU
Use the vhba --stats command to display remote port statistics.
vhba --stats <pcifn>
where:
pcifn

vNIC statistics (CNA or NIC)

Display virtual Network Interface Card (vNIC) statistics on Fabric Adapter ports configured in CNA or
NIC mode. Use HCM and BCU to display statistics, which are relevant to the Ethernet I/O controller
(IOC). Statistics such as the following display:
•
•
86
Polling frequency
Heartbeat failures
Firmware boots
vHBA statistics timeouts
Enable/disable replies
Enable/disable requests
I/O path TOVs expired
I/O clean-up requests
IT Nexus onlines, offlines, create requests
TM requests
I/O timeouts
Total I/O count
TM cleanup requests, completions
Host abort requests
PCI function number associated with the vHBA.
Mailbox interrupts
Enable and disable events
Brocade Adapters Troubleshooting Guide
53-1002145-01